Avanti® J-HC High Capacity Three-Phase Centrifuge, 50 Hz, 220 V, 12 A


Performance and biocontainment capabilities unattainable with high-speed or super-speed centrifuges. The J-HC three-phase high capacity centrifuge provides you with a complete solution for batch bioprocessing. Three-phase separation filters the materials into liquids, gasses, and solids. A maximum of nine liters can be spun at speeds of 5,000 RPM and 7,480 x g for greater sample throughput. This allows processing of up to 36 liters per hour when harvesting bacteria. Enhanced operator safety is provided with disposable HarvestLine System Liners. Features include a high-torque, energy efficient drive for the fastest acceleration and deceleration possible with gentle precision. Also, advanced programmability, automatic rotor identification and imbalance safety check, CFC-free refrigerants, Friction Reduction System (FRS) for optimum temperature control, low energy consumption and low heat output. Includes Paperless documentation, data management, and current good manufacturing practice (CGMP) compliance with the Spintrace II network software. The J-HC is the highest capacity centrifuge in its class and provides the fastest accel and decel times with exclusive SR (Switched Reluctance) Drive technology.

Технические спецификации

Platform Avanti
Maximum Speed 10,000 rpm
Maximum g-Force 17,100.00|x g
BioSafe Нет
Acceleration Maximum or Slow
Deceleration Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off
Speed Control 25 x <i>g</i>-force control sets speed to nearest ± 50 rpm
Timed Run 1 min to 99 hrs, 59 mins (timed run); Total centrifuge effect (g-seconds) or Continuous hold
Max Capacity Volume Range 1 - 9 L
Refrigeration System Non-CFC, non-ozone depleting refrigerant
Temperature Range(s) 10°C - 40°C in 1 degree increments
Pollution Degree 2
Environmental Conditions -10°C to 40°C in 1° increments
Installation Category II
Software Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android
Material(s) Steel, Structural Foam
Finish Powder Coat Paint
Weight 267.4 kg / 589.5 lb
Width 71 cm / 28 in
Depth 86 cm (102.0 cm with air direviter extending)
Height 86 cm (152 cm with door open)
Clearances 7.6 cm (sides) & 16 cm (rear)
Humidity Restrictions < 95% (non-condensing)
Power Requirements 50 Hz, 3 Phase

Посетители также интересовались


Что означает регулярный статус продукта:
IVD: In Vitro Diagnostic. Данная продукция предназначена для клинической диагностики in vitro.
ASR: Analyte Specific Reagents. Специфические аналитические реагенты. Аналитические и технические характеристики не установлены.
CE: Продукция, предназначенная для клинической диагностики in vitro и соответствующая директиве Европейского союза (98/79/EC). (Примечание: Оборудование может соответствовать другим директивам Европейского союза, и иметь соответствующую маркировку.)
RUO: Research Use Only. Данная продукция предназначена только для научных исследований и не предназначена для клинической диагностики.
LUO: Laboratory Use Only. Продукция предназначены только для лабораторного использования.
Без регуляторного статуса: немедицинские изделия и изделия, не подлежащие обязательной регистрации в регуляторных органах. Данная продукция не предназначена для клинического применения.